RUBR FLASH INSTRUCTIONS
Posted by Beth Smolen on May 23, 2012 0 Comments
FLASH INSTRUCTIONS
REMOVE WATCH FROM CASE TO SET
BUTTONS
__________
2 | (5) | 3
| |
1 |__________|4
BUTTON 2 - press and release to illuminate
BUTTON 1 - changes mode
Watch normally starts in time mode
Press button 1 once to enter stopwatch mode
Press button 1 again tot enter alarm mode
Press button 1 again to enter time set mode
STOPWATCH MODE
Press 1 to enter stopwatch mode
Press 3 to stopwatch if running
Press 4 to reset stopwatch to 0
Press 3 to start
Press 3 again to stop
press 1 after using to return to time mode
ALARM MODE
Press 1 twice to enter alarm mode
hour flashing - press 3 to adjust
Press 4 to switch to minutes, minutes flashing, press 3 to adjust
Press 1 after adjusting to return to time mode
TO ACTIVATE/DEACTIVATE ALARM
In time mode only - Press 3 and 4 together to toggle on/off. Indicator for alarm is #5
TIME SET MODE
Press 1 three times to enter time set mode
seconds flash - press 3 to set to 0
Press 4 to switch to minutes, minutes flash, press 3 to adjust
Press 4 to switch to hours, hours flash, press 3 to adjust
Press 4 to switch to date/day of month, day # flashes, press 3 to adjust
Press 4 to switch to date/month, month flashes, press 3 to adjust
Press 4 to switch to day of week, day flashes, press 3 to adjust
PRESS 1 TO EXIT TO TIME MODE
OR
PRESS 4 TO BEGIN TIME SET MODE AGAIN

